NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Manometer PG-75

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum DigiKey Online-Shop.
Gehen Sie zum MOUSER Online-Shop.

Pressure gauge PG-75

  • Compact, lightweight and multi-functional generalpurpose pressure gauge.
  • It is adopted welding integral structure with SUS304/316L at pressure receiving section.
  • A pressure display function is substantial. (3 1/2 digit, 7 segment LED, 2-color LED red / green change, Nondisplay mode)
  • Two types of analog output , one is voltage output(1-5V),The other is current output( 4-20mA).
  • The gage pressure is (0~positive pressure), compound pressure range (negative pressure ~ positive pressure),to support maximum of 3.5 MPa.
  • Comply with IP65, CE Marking and UL certification obtained.

General specifications

Model number 102G103G 353G 102R  103R 353R
Pressure reference Gauge Gauge (Compound)
Rated pressurePr(L) ~ Pr(H) 0~100kPa 0~1.0MPa 0~3.5MPa -100~100kPa -0.1~1.0MPa -0.1~3.5MPa
Maximum pressurePmax 200kPa 2MPa 5MPa 200kPa 2MPa 5MPa
Break-down pressurePb 300kPa 3MPa 7MPa 300kPa 3MPa 7MPa
Full-scaleFS 100KPa 1MPa 3.5MPa 200kPa 1.1MPa 3.6MPa
Pressure Medium Corrosive gases/Liquids compatible with SUS304 and SUS316L
Sealed liquid Silicone oil
Operating voltageVopr 10.8~30VDC(Including ripple percentage)
Consumption current 50mA maximum (Not included current analog output)
Protection grade IP65 of IEC
Operating temp.  -10 〜 50℃ (Storage Temperature : -20 〜 70℃ )
Operating humidity 35 ~ 85% RH
Insulation resistance 100MΩ minimum at DC500V between bundled leads and pressure port
Dielectric strength One minuts at AC500V between bundled leads and pressure port (1mA maximum leakage)
Type of mounting Stem mount, Back mount
Pressure Port R1(R1/8)、R2(R1/4)
Fitting materials Diaphragm :SUS316L、Fitting :SUS304
Net Weight  Approx. 115±15g (incl. 2m cable)

Switch output

Number of outputs Two outputs (NPN/PNP)
Switching capacity 30VDC / 100mA maximum
Residual voltage 1.2V maximum (NPN) / 2.2V maximum (PNP), Load current 100mA
Hysteresis 0 〜 Approx 0.3Pr(H),(Adjustable)
Repeatability ±0.3 % FS / Reference temp. 25℃
Accuracy ±2%FS (Integrated accuracy:Including errors of setting, linearity, hystresis and thermal error.)
Response Approx 5 ms (Digital filter settings :”F0”)
Protection Exists / Short circuit protection(Switch Overload current detection :Approx 150mA minimum)
State indication SW monitor LED(2 points) ,Lighted when the switch output is ON.(Pressure display inverted colors)

Analog output

Voltage outputVo 1 〜 5V / Pr(L) 〜 Pr(H) , F.S. : 4V
Accuracy ±2%F.S. (Integrated accuracy) /Measurement load resistance(1MΩmaximum)
Resolution Approx. 2.7mV(Approx 0.068% F.S.)(11bitDAC)
Output resistance Approx. 1kΩ (Internal impedance)
Response Approx. 2ms maximum
Current outputIo 4 〜 20mA / Pr(L) 〜 Pr(H), F.S. : 16mA
Accuracy ±2%F.S. (Integrated accuracy) /Measurement load resistance(250Ωmaximum)
Resolution Approx. 0.011mA(Approx 0.068% F.S.)(11bitDAC)
Output resistance Vopr ≦ 18VDC : 50 ~ 300Ω, Vopr > 18VDC : 50 ~ 500Ω
Response Approx. 2ms maximum

Pressure display

Display element 3 1/2 digits, 7 segment LED (Red/Green) Reverse display selectable in tandem with SW1.
Display cycle 5 times /sec( moving average)
Accuracy ± 2% F.S.(Integrated accuracy)

ENVIRONMENTAL CHARACTERISTICS

Test itemTest conditions(At 25 ± 5 °C)Permissible change
Vibration 10 〜 500Hz 1.5mm maximum / 98.1m/s2, three directions, two hours each Pressure indication, switch operating pressure and analog output (zero and span) : ± 2%F.S. maximum during test
   
Shock 490 m/s2 , 3 directions for 3 times each
Moisture resistance 40 °C, 90 ~ 95 %RH, 240 hrs
Pressure cycling 0 ~ Rated pressure, 106 cycles

MODEL NUMBER DESIGNATION

PG-75 -102R-NVR2B

Series name

Rated pressure

102G:0~100kPa

102R:-100~100kPa

103G:0~1.0MPa

103R:-0.1~1.0MPa

353G:0~3.5MPa

353R:-0.1~3.5MPa

Switch output interface 

N:NPN open collector

P:PNP open collector

Analog output

V:Voltage output(1–5 V)

A:Current output(4–20mA)

Fitting(With M5 female screw)

R1:R 1/8

R2:R 1/4

Pressure port

Blank:Stem mount

B:Back mount

LIST OF MODEL NUMBERS

Model numberRated pressureType of mountingPressure PortSW outputAnalog outputCAD
⇒ PG-75-102G-NVR1 0~100kPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-102G-NAR1 0~100kPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-102G-PVR1 0~100kPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-102G-PAR1 0~100kPa Stem mount R1/8 PNP 4~20mA
⇒ PG-75-102G-NVR2 0~100kPa Stem mount R1/4 NPN 1~5V
⇒ PG-75-102G-NAR2 0~100kPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-102G-PVR2 0~100kPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-102G-PAR2 0~100kPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-102G-NVR1B 0~100kPa Back mount R1/8 NPN 1~5V
⇒ PG-75-102G-NAR1B 0~100kPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-102G-PVR1B 0~100kPa Back mount R1/8 PNP 1~5V
⇒ PG-75-102G-PAR1B 0~100kPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-102G-NVR2B 0~100kPa Back mount R1/4 NPN 1~5V
⇒ PG-75-102G-NAR2B 0~100kPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-102G-PVR2B 0~100kPa Back mount R1/4 PNP 1~5V
⇒ PG-75-102G-PAR2B 0~100kPa Back mount R1/4 PNP 4~20mA
⇒ PG-75-102R-NVR1 -100~100kPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-102R-NAR1 -100~100kPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-102R-PVR1 -100~100kPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-102R-PAR1 -100~100kPa Stem mount R1/8 PNP 4~20mA
PG-75-102R-NVR2 -100~100kPa Stem mount R1/4 NPN 1~5V
PG-75-102R-NAR2 -100~100kPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-102R-PVR2 -100~100kPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-102R-PAR2 -100~100kPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-102R-NVR1B -100~100kPa Back mount R1/8 NPN 1~5V
⇒ PG-75-102R-NAR1B -100~100kPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-102R-PVR1B -100~100kPa Back mount R1/8 PNP 1~5V
⇒ PG-75-102R-PAR1B -100~100kPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-102R-NVR2B -100~100kPa Back mount R1/4 NPN 1~5V
⇒ PG-75-102R-NAR2B -100~100kPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-102R-PVR2B -100~100kPa Back mount R1/4 PNP 1~5V
⇒ PG-75-102R-PAR2B -100~100kPa Back mount R1/4 PNP 4~20mA
⇒ PG-75-103G-NVR1 0~1.0MPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-103G-NAR1 0~1.0MPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-103G-PVR1 0~1.0MPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-103G-PAR1 0~1.0MPa Stem mount R1/8 PNP 4~20mA
⇒ PG-75-103G-NVR2 0~1.0MPa Stem mount R1/4 NPN 1~5V
⇒ PG-75-103G-NAR2 0~1.0MPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-103G-PVR2 0~1.0MPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-103G-PAR2 0~1.0MPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-103G-NVR1B 0~1.0MPa Back mount R1/8 NPN 1~5V
⇒ PG-75-103G-NAR1B 0~1.0MPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-103G-PVR1B 0~1.0MPa Back mount R1/8 PNP 1~5V
⇒ PG-75-103G-PAR1B 0~1.0MPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-103G-NVR2B 0~1.0MPa Back mount R1/4 NPN 1~5V
⇒ PG-75-103G-NAR2B 0~1.0MPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-103G-PVR2B 0~1.0MPa Back mount R1/4 PNP 1~5V
⇒ PG-75-103G-PAR2B 0~1.0MPa Back mount R1/4 PNP 4~20mA
⇒ PG-75-103R-NVR1 -0.1~1.0MPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-103R-NAR1 -0.1~1.0MPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-103R-PVR1 -0.1~1.0MPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-103R-PAR1 -0.1~1.0MPa Stem mount R1/8 PNP 4~20mA
PG-75-103R-NVR2 -0.1~1.0MPa Stem mount R1/4 NPN 1~5V
PG-75-103R-NAR2 -0.1~1.0MPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-103R-PVR2 -0.1~1.0MPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-103R-PAR2 -0.1~1.0MPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-103R-NVR1B -0.1~1.0MPa Back mount R1/8 NPN 1~5V
⇒ PG-75-103R-NAR1B -0.1~1.0MPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-103R-PVR1B -0.1~1.0MPa Back mount R1/8 PNP 1~5V
⇒ PG-75-103R-PAR1B -0.1~1.0MPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-103R-NVR2B -0.1~1.0MPa Back mount R1/4 NPN 1~5V
⇒ PG-75-103R-NAR2B -0.1~1.0MPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-103R-PVR2B -0.1~1.0MPa Back mount R1/4 PNP 1~5V
⇒ PG-75-103R-PAR2B -0.1~1.0MPa Back mount R1/4 PNP 4~20mA
⇒ PG-75-353G-NVR1 0~3.5MPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-353G-NAR1 0~3.5MPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-353G-PVR1 0~3.5MPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-353G-PAR1 0~3.5MPa Stem mount R1/8 PNP 4~20mA
⇒ PG-75-353G-NVR2 0~3.5MPa Stem mount R1/4 NPN 1~5V
⇒ PG-75-353G-NAR2 0~3.5MPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-353G-PVR2 0~3.5MPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-353G-PAR2 0~3.5MPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-353G-NVR1B 0~3.5MPa Back mount R1/8 NPN 1~5V
⇒ PG-75-353G-NAR1B 0~3.5MPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-353G-PVR1B 0~3.5MPa Back mount R1/8 PNP 1~5V
⇒ PG-75-353G-PAR1B 0~3.5MPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-353G-NVR2B 0~3.5MPa Back mount R1/4 NPN 1~5V
⇒ PG-75-353G-NAR2B 0~3.5MPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-353G-PVR2B 0~3.5MPa Back mount R1/4 PNP 1~5V
⇒ PG-75-353G-PAR2B 0~3.5MPa Back mount R1/4 PNP 4~20mA
⇒ PG-75-353R-NVR1 -0.1~3.5MPa Stem mount R1/8 NPN 1~5V
⇒ PG-75-353R-NAR1 -0.1~3.5MPa Stem mount R1/8 NPN 4~20mA
⇒ PG-75-353R-PVR1 -0.1~3.5MPa Stem mount R1/8 PNP 1~5V
⇒ PG-75-353R-PAR1 -0.1~3.5MPa Stem mount R1/8 PNP 4~20mA
PG-75-353R-NVR2 -0.1~3.5MPa Stem mount R1/4 NPN 1~5V
PG-75-353R-NAR2 -0.1~3.5MPa Stem mount R1/4 NPN 4~20mA
⇒ PG-75-353R-PVR2 -0.1~3.5MPa Stem mount R1/4 PNP 1~5V
⇒ PG-75-353R-PAR2 -0.1~3.5MPa Stem mount R1/4 PNP 4~20mA
⇒ PG-75-353R-NVR1B -0.1~3.5MPa Back mount R1/8 NPN 1~5V
⇒ PG-75-353R-NAR1B -0.1~3.5MPa Back mount R1/8 NPN 4~20mA
⇒ PG-75-353R-PVR1B -0.1~3.5MPa Back mount R1/8 PNP 1~5V
⇒ PG-75-353R-PAR1B -0.1~3.5MPa Back mount R1/8 PNP 4~20mA
⇒ PG-75-353R-NVR2B -0.1~3.5MPa Back mount R1/4 NPN 1~5V
⇒ PG-75-353R-NAR2B -0.1~3.5MPa Back mount R1/4 NPN 4~20mA
⇒ PG-75-353R-PVR2B -0.1~3.5MPa Back mount R1/4 PNP 1~5V
⇒ PG-75-353R-PAR2B -0.1~3.5MPa Back mount R1/4 PNP 4~20mA

The products marked ⇒ are manufactured upon receipt of order basis.

MULTIPLIER FACTOR

  • The multiplier factor is selectable by changing the value of third digit on the display during the operation setting.
  • The settings indicated by "-" on the table above are not selectable because of resolution.
  • Either "1"(for 102A, 102V, 102G, and 102R) or "8" (for 103G, 103R, 353G and 353R) are set prior to delivery.
  • Changes of the multiplier factor apply to display values. Also, note the changes reset switch setting value and hysteresis.

SWITCH OUTPUT MODE

  • SW output is selectable by changing the value of first digit on the display

  • In the Separate mode, SW 1 corresponds to Setting 1 and SW2 corresponds to Setting 2.
  • In the Window Comparator Mode, SW 1 corresponds to the Setting 1 (lower limit) and Setting 3 (upper limit). Also. SW2 corresonds to the setting 2 (lower limit) and setting 4 (upper limit).
  • The Hysteresis (H) setting is common to SW 1 and SW 2 operations.
  • When SW operation is changed between the Separate Mode and Window Comparator Mode, SW pressure settings that are set separately will be reset.

INTERNAL ELECTRICAL SCHEMATICS

EXTERNALS SPECIFICATION

MEANS OF ATTACHMENT (Option)

 

Others

  • Tube at air intake
    If there is a possiblity that liquids such as water, oil etc splash to the main body and it may flow into the inside of the product through the air intake, connect a silicon tube to the air intake and position the other end of the tube in a suitable safe place. At that time, do not bend the tube or block the other end of the tube.
  • Piping
    Use a wrench on the hexagon of the fitting. Do not hold the main body when tightening.

ACCESSORIES (Sold separately)

NameSeries nameContentsApplicable model
Panel holder set ACPG-003 Panel holder cover
Panel holder
Panel stopper (2pcs.)
PG-30 · PG-35 · PG-75 ·
PG-35H · PG-35L
Holder cover set
(For protecting gauge operating panel)
ACPG-004 Panel holder cover
Panel holder
PG-30 · PG-35 · PG-75 ·
PG-35H · PG-35L
Holder stopper set ACPG-007 Panel holder
Panel stopper (2pcs.)
PG-30 · PG-35 · PG-75 ·
PG-35H · PG-35L

HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately)

◆PG-30 • PG-35 • PG-35H • PG-35L • PG-75 Panel cut holder set & holder cover set

◆Panel holder cover set

 

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top