NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

Liste

×

×


Produkte

Verteiler

EU-Deutsch

×

Druckschalter PS30

●Um einen Kauf zu tätigen, wenden Sie sich an die Verteiler
oder nutzen Sie den stehenden Online-Shops unten.
Verkaufskanal  Überprüfen Sie die Verteiler.
VERKAUFSKANALKlicken Sie hier, um den Verteiler zu überprüfen.
Gehen Sie zum Farnell Online-Shop.
Gehen Sie zum DigiKey Online-Shop.
Gehen Sie zum MOUSER Online-Shop.

PRESSURE SWITCHES WITH GAUGE

  • Optimum for pneumatic equipment and semiconductor manufacturing equipment
  • Larger size display and high luminance LED for best visibility
  • Eight switch output modes
  • Low consumption by nondisplay mode

MODEL NUMBER DESIGNATION

PS30-102R-N

Series name

Rated pressure range 

102R:−100 ~ 100 kPa

103R:−0.1 MPa ~ 1.00 MPa

Switch output interface

N:NPN open collector

P:PNP open collector

LIST OF MODEL NUMBERS

Model numbersPressure referenceRated pressureSwitch output interfaceCAD
PS30-102R-N Gauge −100 ~ 100 kPa NPN
PS30-103R-N Gauge −100 ~ 1000 kPa NPN
PS30-103R-P Gauge −100 ~ 1000 kPa PNP
PS30-102R-P Gauge −100 ~ 100 kPa PNP

STANDARD SPECIFICATIONS

  • Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5 °C and excitation voltage of 24 V DC.
Item102R103R
Pressure reference Gauge
Rated pressure range − 100 ~ 100kPa − 100 ~ 1000kPa
Maximum pressure 200kPa 1500kPa
Break-down pressure 500kPa 2000kPa
Operating temp. range − 10 ~ 50°C
Compensated temp. range 0 ~ 50°C
Thermal error ± 3 %F.S. (0 ~ 50 °C)
Operating humidity 35 ~ 85%R(No condensation)
Storage temp. − 20 ~ 70°C(Atmospheric pressure, humidity 65 %RH maximum)
Pressure medium Non-corrosive gases
Insulation resistance 100 MΩ minimum(DC 500 V)
Dielectric strength 500 V AC, 60 s(Leakage current 1 mA maximum)
Pressure port M5 female screw, “O” ring groove (P8)
Net weight Approx. 60g(Including 1.5 m cable)
Supply voltage 12 ~ 24 V ± 10 %(Including ripple voltage)
Consumption current 40mA maximum

Display

 Item102R103R
Display element LED( 2 and 1/2 digit)
Rated display range − 100 ~ 100kPa − 0.10 ~ 1.00MPa
Display accuracy ± 1 %F.S.
Resolution 1 count

Switch output

No. of outputs 2
Output interface Open collector output (NPN or PNP)
Display Output 1 (SW1), Output 2 (SW2) Light on when output is ON
Repeatability ± 0.3%F.S. maximum 
Switch hysteresis 0 ~ 30 counts(Adjustable)
Switching capacity 30 V DC    100 mA maximum    Short-circuit protection
Residual voltage 1.2 V maximum (NPN), 2.2 V maximum(PNP)
Response Approx 5, 25, 250ms(Adjustable)

ENVIRONMENTAL CHARACTERISTICS

Test itemTest conditionsPermissible change
Vibration 10 ~ 500 Hz, 98.1 m/s2 or 1.5 mm P-P, 3 directions for 2 hours each ± 2 %F.S. maximum after test ※1
Shock 490 m/s2, 3 directions for 3 times each
Pressure cycling 0 ~ Rated pressure  106 cycles
Moisture resistance 40 °C, 90 ~ 95 %RH, 240 hrs.
※ 1 Change in the pressure indication, switch operating points.

OUTLINE DIMENSIONS

Unless otherwise specified, tolerance : ± 0.5 (Unit : mm)

 

INTERNAL ELECTRICAL SCHEMATICS

SELECTION OF DISPLAY MULTIPLIER

(Note) Diagonal column : No unit can be selected due to resolution and number of digits.

SWITCH OUTPUT MODE

  • (Note 1) In the Separte Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2.
  • (Note 2) In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Settng 2.

HOW TO MOUNT OPTIONAL ACCESSORIES (Sold separately)

●Die oben genannten Inhalte können ohne vorherige Ankündigung geändert werden.

Produkte

×

page top