NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

EU-English

×

Trimmer potentiometer RJ-6

Single Turn Cermet Trimmers

 

FeaturesFeatures
  • Wide resistance range from 10 Ω to 5 M Ω
  • Low contact resistance variation (1 % maximum)
  • Precious metal alloy wiper

Electrical Characteristics

Power ratings 0.5 W (70 °C) 0 W (120 °C)
Nominal resistance range 10 Ω ~ 5 MΩ
Resistance tolerance ± 10 %
Resistance law Linear law(B)
Maximum input voltage DC200 V or power rating, whichever is smaller
Maximum wiper current 100 mA or power rating, whichever is smaller
Effective electrical angle 230 ° (1 turn)
End resistance 1 % or 2 , whichever is greater
C.R.V. 1 % or 3 , whichever is greater
1 % or 3 , whichever is greater −55 ~ 120 °C
Temp. coefficient 10 Ω, 20Ω, 5 MΩ : ± 250 10-6/°C maximum
50 Ω ~ 2 MΩ : ± 100 10-6/°C maximum
Insulation resistance 1000 MΩ minimum (DC500 V)
Dielectric strength AC900 V, 60 s
Net weight Approx. 0.60 g (RJ-6P,W)
Approx. 0.80 g (RJ-6S, X)
Approx. 1.01 g (RJ-6F)

Mechanical Characteristics

Stop strength 50 mN·m {510 gf·cm} minimum
Mechanical angle 270 ° (1 turn)
Operating torque 2~ 15 mN·m {20 ~ 153 gf·cm}
Rotational life 200 cycles
10 Ω ~ 200 Ω [ΔR/R ≦ ± (0.5 Ω +3 %)]
500 Ω ~ 5 MΩ [ΔR/R ≦ ± (0.5 Ω +2 %)]
Terminal to strength 10 N {1.02 kgf} minimum(Tensile strength)
Thrust rotor 10 N {1.02 kgf} minimum
Solderability 245 ± 3 °C, 2 ~ 3 s

{ }:Reference only

Environmental Characteristics

Test itemTest conditionsSpecifications
Thermal shock -65~125 °C (0.5 h), 5 cycles [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Humidity -10~65 °C (Relative humidity 80~98%), 10 cycles, 240 h [ΔR/R ≦ 1%]
Shock 981 m/s2, 6 ms 6 directions for 3 times each [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Vibration Amplitude 1.52 mm or Acceleration 196 m/s2 , 10 ~ 2000 Hz, 3 directions, 12 times each [ΔR/R ≦ 1%] [S.S. ≦ 1%]
Load life 70 °C, 0.5 W, 1000 h [ΔR/R ≦ 2 %] [S.S. ≦ 1 %]
Low temp. operation −55 °C, 2 h [ΔR/R ≦ 1 %] [S.S. ≦ 2 %]
High temp. exposure 120 °C, 250 h [ΔR/R ≦ 2 %] [S.S. ≦ 2 %]
Immersion seal 85 °C, 60 s No leaks (No continuous bubbles)
Soldering heat Flow: 260 ± 3 ° C、5 ~ 6 s, two times
Manual soldering: 380 ± 10 °C, 3 ~ 4 s
[ΔR/R ≦ 1%]

Δ R/R: Change in total resistance

S.S.: Setting stability

Maximum Input Ratings

Nominal resistance values (Ω)Resistance codeMaximum input voltage(V)Maximum wiper current (mA)
➡10 100 1.00 100
➡20 200 2.00 100
50 500 5.00 100
100 101 7.07 70.7
200 201 10.0 50.0
500 501 15.8 31.6
1k 102 22.4 22.4
2k 202 31.6 15.8
5k 502 50.0 10.0
10k 103 70.7 7.07
20k 203 100 5.00
➡25k 253 112 4.48
50k 503 158 3.16
100k 104 200 2.00
200k 204 200 1.00
➡250k 254 200 0.80
500k 504 200 0.40
1M 105 200 0.20
2M 205 200 0.10
➡5M 505 200 0.04
The products indicated by ➡ mark are manufactured upon receipt of order basis.

Part Number Designation

RJ-6P10 kΩ(103)
Series name


Product shape
P:Top adjustment
S:Side adjustment
W:Top adjustment
X:Side adjustment
F:Rear adjustment

Resistance value


Resistance code


 

List of Part Numbers

Nominal resistance values ➡10Ω, ➡20Ω,50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, ➡25kΩ, 50kΩ, 100kΩ, 200kΩ, ➡250kΩ,500kΩ, 1MΩ, 2MΩ, ➡5MΩ
  • The above part numbers are all available with the respective combination of <Nominal resistance values> 
  • Verify the above part numbers when placing orders.
  • The products indicated by ➡ mark are manufactured upon receipt of order basis.
PART NUMBERAdjustment positionForm of packagingPieces in packageCAD
RJ-6P Top adjustment Plastic bag 50 pcs./pack
RJ-6W Top adjustment Plastic bag 50 pcs./pack
RJ-6S Side adjustment Plastic bag 50 pcs./pack
RJ-6X Side adjustment Plastic bag 50 pcs./pack
RJ-6F Rear adjustment Plastic bag 50 pcs./pack

Outline Dimensions

Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top