Trimmer potentiometer RJ-5
- ●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
14 turns Cermet Trimmers
FeaturesFeatures
- Fine setting is possible
- Sealed construction
- Resin material is UL Recognized 94V-0 (Excluding adhesives)
- In this series, chemSHERPA-AI downloads are available,
which can be used for REACH-SVHC surveys, etc. - Download chemSHERPA-AI from the list of P/N below
Electrical Characteristics
Power ratings | 0.25 W (85 °C) 0 W (120 °C) |
---|---|
Nominal resistance range | 10 Ω ~ 2 MΩ |
Resistance tolerance | ± 10 % |
Resistance law | Linear law(B) |
Maximum input voltage | DC200 V or power rating, whichever is smaller |
Maximum wiper current | 100 mA or power rating, whichever is smaller |
Effective electrical turn | 11 turns |
End resistance | 1 % or 2 Ω , whichever is greater |
C.R.V. | 1 % or 3 Ω , whichever is greater |
Operating temp. range | −55 ~ 120 °C |
Temp. coefficient | ± 100 10-6/°C maximu10 Ω ~ 50 Ω : ± 250 10-6/°C maximum 100 Ω ~ 2 MΩ : ± 100 10-6/°C maximum |
Insulation resistance | 1000 MΩ minimum (DC500 V) |
Dielectric strength | AC600 V, 60 s |
Net weight | Approx. 0.37 g |
Mechanical Characteristics
Mechanical turn | 14 turns |
---|---|
Operating torque | 20 mN·m {204 gf·cm} maximum |
Mechanical stop | Clutch action |
Rotational life | 200 cycles 10 Ω ~ 200 Ω [ΔR/R ≦ ± (0.5 Ω +3 %)] 500 Ω ~ 2 MΩ [ΔR/R ≦ ± (0.5 Ω +2 %)] |
Terminal strength | 10 N {1.02 kgf} minimum(Tensile strength) |
Thrust to shaft | 5 N {0.51 kgf} minimum |
Solderability | 245 ± 3 °C, 2 ~ 3 s |
{ }:Reference only
Environmental Characteristics
Test item | Test conditions | Specifications |
---|---|---|
Shock | 981 m/s2, 6 ms 6 directions for 3 times each | [ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
Thermal shock | −65 ~ 125 °C(0.5 h), 5 cycles | [ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
Humidity | −10 ~ 65 °C ( Relative humidity 80 ~ 98 %),10 cycles, 240 h | [ΔR/R ≦ 1 %] |
Vibration | Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ~ 2000 Hz, 3 directions, 12 times each |
[ΔR/R ≦ 1 %] [S.S. ≦ 1 %] |
Load life | 85 °C, 0.25 W, 1000 h | [ΔR/R ≦ 2 %] [S.S. ≦ 1 %] |
Low temp. operation | −55 °C, 2 h | [ΔR/R ≦ 2 %] [S.S. ≦ 2 %] |
High temp. exposure | 120 °C, 250 h | [ΔR/R ≦ 2 %] [S.S. ≦ 2 %] |
Immersion seal | 85 °C, 60 s | No leaks (No continuous bubbles) |
Soldering heat | Flow soldering :260 ± 3 °C, 5 ~ 6 s, two times maximum Manual soldering : 380 ± 10 °C, 3 ~ 4 s |
[ΔR/R ≦ 1 %] |
Maximum Input Ratings
Nominal resistance values(Ω) | Resistance code | Maximum input voltage(V) | Maximum wiper current(mA) |
---|---|---|---|
10※ | 100 | 1.00 | 100 |
20※ | 200 | 2.00 | 100 |
50 | 500 | 3.53 | 70.7 |
100 | 101 | 5.00 | 50.0 |
200 | 201 | 7.07 | 35.3 |
500 | 501 | 11.1 | 22.3 |
1k | 102 | 15.8 | 15.8 |
2k | 202 | 22.3 | 11.1 |
5k | 502 | 35.3 | 7.07 |
10k | 103 | 50.0 | 5.00 |
20k | 203 | 70.7 | 3.53 |
50k | 503 | 111 | 2.23 |
100k | 104 | 158 | 1.58 |
200k | 204 | 200 | 1.00 |
500k | 504 | 200 | 0.40 |
1M | 105 | 200 | 0.20 |
2M | 205 | 200 | 0.10 |
The products indicated by ※mark are manufactured upon receipt of order basis.
Part Number Designation
RJ-5 | E | W | 100Ω | (104) |
---|---|---|---|---|
Series name |
Terminal pin
E:Sn (Lead-free) |
Product shape |
Resistance value |
Resistance code |
|
Nominal resistance values | 10Ω*, 20Ω*, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ |
---|
The above part numbers are all available with the respective combination of Nominal resistance values.(The products indicated by * mark are manufactured upon receipt of order basis.) For the resistance value symbol, please refer to the maximum input rating table above.
List of Part Numbers
Downloads of chemSHERPA (e.g. for REACH-SVHC surveys) are available below. *Need to log in to download. [chemSHERPA-AI latest ver. 2.09.00]
Part number | Adjustment position | Shape of terminal | Pieces in package | REACH-SVHC | CAD |
---|---|---|---|---|---|
RJ-5EW | Top adjustment | Through hole | 50 pcs./pack | ||
RJ-5EX | Side adjustment | Through hole | 50 pcs./pack | ||
RJ-5EP | Side adjustment | Through hole | 50 pcs./pack |
Outline Dimensions
Unless otherwise specified, tolerance: ± 0.3 (Unit: mm)
![](/file/img/rj-5_out.png)
Environmental Data
- ●The above contents and descriptions are subject to change without notice.