Rotary coded switch S-7000
- ●To make a purchase, contact Distributors, or use e-commerce below.
SALES CHANNEL ;Check our Distributors.- SALES CHANNELClick here to check our Distributors.
Surface Mount Dip Rotary coded switch
- Low profile of 2.9 mm
- Wide variety (top or side setting, 6, 10 or 16 positions, J-hook, gull wing or throuhg hole pins) to choose from
- Compatible with flow (top setting only) / reflow soldering
- Washable
- Resin materials are UL Recognized 94V-0 or 94V-1 equivalent
- In this series, chemSHERPA downloads are available, which can be used for REACH-SVHC surveys, etc.
- Click to go to the List of Part Numbers below for download
Standard specifications
Circuit type | BCD (Real code, complementary code) BCH (Real code, complementary code) |
---|---|
Operating temperature range | −40 ~ 85 °C |
Storage temperature range | −40 ~ 85 °C |
Sealing | Washable by “O” ring |
Net weight | Approx. 0.26 g (A or B type in top setting)
Approx. 0.28 g (C type in top setting) Approx. 0.62 g (Side setting type) |
Electrical characteristics
Contact rating | Non-switching:DC50 V 100 mA Switching:DC5 V 100 mA Minimum:DC20 mV 1 μA |
---|---|
Contact resistance | 100 mΩ maximum |
Insulation resistance | 100 MΩ (DC100 V) minimum |
Dielectric strength | AC250 V, 60 s |
Mechanical characteristics
No. of positions | 6, 10, 16 |
---|---|
Adjustment torque | 20 mN·m {204 gf·cm} maximum |
Stepping angle | 60° (6 positions) 36° (10 positions) 22.5° (16 positions) |
Solderability | 245 ± 3 °C, 2 ~ 3 s |
Soldering heat | Reflow:255 °C(Peak temperature) Flow : 260 ± 3 °C, 5 ~ 6 s, two times maximum Manual soldering : 350 ± 10 °C, 3 ~ 4 s |
Substrate bending | Width 90 mm, bend 3 mm, 5 s, 1 time |
Shear (adhesion) | 5 N {0.51 kgf}, 10 s |
Pull-off strength | 5 N {0.51 kgf}, 10 s |
{ } : Reference only
〈Reflow profile for soldering heat evaluation〉
|
Environmental characteristics
Vibration | Amplitude 1.5 mm or Acceleration 98 m/s2, 10-500-10 Hz, 3 directions for 2 h each |
---|---|
Shock | 490 m/s , 11 ms、6 directions for 3 times each |
Load life | 10000 steps minimum, DC5 V, 100 mA |
Humidity (Steady state) | 40 °C, Relative humidity 90 ~ 95 %, 240 h |
High temperature exposure | 85 °C, 96 h |
Low temperature exposure | − 40 °C, 96 h |
Thermal shock | − 40 (0.5 h) ~ 85 °C ( 0.5 h ), 5 cycles |
Part Number Designation
S-7 | 0 | 1 | 0 | E | T | A |
---|---|---|---|---|---|---|
Series name |
Shape of rotor 0:Without knob |
Code format 1:10 positions, real code |
Setting position 0:Top setting |
Terminal pin E:Au (Lead-free) |
Form of packaging T:Taping (Reel) |
Shape of terminal A:J-hook |
List of Part Numbers
Part number | Setting position | Shape of terminal | Code format | Packaging quantity | REACH-SVHC | CAD |
---|---|---|---|---|---|---|
S-7060ETA | Top | J-hook | Binary coded hexal Real code | 500 pcs. / reel | ||
S-7060EA | Top | J-hook | Binary coded hexal Real code | 50 pcs. / pack | ||
S-7060ETB | Top | Gull wing | Binary coded hexal Real code | 500 pcs. / reel | ||
S-7060EB | Top | Gull wing | Binary coded hexal Real code | 50 pcs. / pack | ||
S-7010ETA | Top | J-hook | Binary coded decimal Real code | 500 pcs. / reel | ||
S-7010EA | Top | J-hook | Binary coded decimal Real code | 50 pcs. / pack | ||
S-7010ETB | Top | Gull wing | Binary coded decimal Real code | 500 pcs. / reel | ||
S-7010EB | Top | Gull wing | Binary coded decimal Real code | 50 pcs. / pack | ||
S-7010EWC | Top | Through hole pin | Binary coded decimal Real code | 50 pcs. / tray | ||
S-7010EC | Top | Through hole pin | Binary coded decimal Real code | 50 pcs. / pack | ||
⇛S-7011ETA | Side | J-hook | Binary coded decimal Real code | 500 pcs. / reel | ||
⇛S-7011EA | Side | J-hook | Binary coded decimal Real code | 50 pcs. / pack | ||
⇛S-7011ETB | Side | Gull wing | Binary coded decimal Real code | 500 pcs. / reel | ||
⇛S-7011EB | Side | Gull wing | Binary coded decimal Real code | 50 pcs. / pack | ||
⇛S-7011EWC | Side | Through hole pin | Binary coded decimal Real code | 50 pcs. / tray | ||
⇛ S-7011EC | Side | Through hole pin | Binary coded decimal Real code | 50 pcs. / pack | ||
S-7030ETA | Top | J-hook | Binary coded decimal Complementary code | 500 pcs. / reel | ||
S-7030EA | Top | J-hook | Binary coded decimal Complementary code | 50 pcs. / pack | ||
S-7030ETB | Top | Gull wing | Binary coded decimal Complementary code | 500 pcs. / reel | ||
S-7030EB | Top | Gull wing | Binary coded decimal Complementary code | 50 pcs. / pack | ||
S-7030EWC | Top | Through hole pin | Binary coded decimal Complementary code | 50 pcs. / tray | ||
S-7030EC | Top | Through hole pin | Binary coded decimal Complementary code | 50 pcs. / pack | ||
⇛S-7031ETA | Side | J-hook | Binary coded decimal Complementary code | 500 pcs. / reel | ||
⇛S-7031EA | Side | J-hook | Binary coded decimal Complementary code | 50 pcs. / pack | ||
⇛S-7031ETB | Side | Gull wing | Binary coded decimal Complementary code | 500 pcs. / reel | ||
⇛S-7031EB | Side | Gull wing | Binary coded decimal Complementary code | 50 pcs. / pack | ||
⇛S-7031EWC | Side | Through hole pin | Binary coded decimal Complementary code | 50 pcs. / tray | ||
⇛ S-7031EC | Side | Through hole pin | Binary coded decimal Complementary code | 50 pcs. / pack | ||
S-7050ETA | Top | J-hook | Binary coded hexadecimal Real code | 500 pcs. / reel | ||
S-7050EA | Top | J-hook | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
S-7050ETB | Top | Gull wing | Binary coded hexadecimal Real code | 500 pcs. / reel | ||
S-7050EB | Top | Gull wing | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
S-7050EWC | Top | Through hole pin | Binary coded hexadecimal Real code | 50 pcs. / tray | ||
S-7050EC | Top | Through hole pin | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
⇛S-7051ETA | Side | J-hook | Binary coded hexadecimal Real code | 500 pcs. / reel | ||
⇛S-7051EA | Side | J-hook | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
⇛S-7051ETB | Side | Gull wing | Binary coded hexadecimal Real code | 500 pcs. / reel | ||
⇛S-7051EB | Side | Gull wing | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
⇛S-7051EWC | Side | Through hole pin | Binary coded hexadecimal Real code | 50 pcs. / tray | ||
⇛S-7051EC | Side | Through hole pin | Binary coded hexadecimal Real code | 50 pcs. / pack | ||
S-7070ETA | Top | J-hook | Binary coded hexadecimal Complementary code | 500 pcs. / reel | ||
S-7070EA | Top | J-hook | Binary coded hexadecimal Complementary code | 50 pcs. / pack | ||
S-7070ETB | Top | Gull wing | Binary coded hexadecimal Complementary code | 500 pcs. / reel | ||
S-7070EB | Top | Gull wing | Binary coded hexadecimal Complementary code | 50 pcs. / pack | ||
S-7070EWC | Top | Through hole pin | Binary coded hexadecimal Complementary code | 50 pcs. / tray | ||
S-7070EC | Top | Through hole pin | Binary coded hexadecimal Complementary code | 50 pcs. / pack | ||
⇛S-7071ETA | Side | J-hook | Binary coded hexadecimal Complementary code | 500 pcs. / reel | ||
⇛S-7071EA | Side | J-hook | Binary coded hexadecimal Complementary code | 50 pcs. / pack | ||
⇛S-7071ETB | Side | Gull wing | Binary coded hexadecimal Complementary code | 500 pcs. / reel | ||
⇛S-7071EB | Side | Gull wing | Binary coded hexadecimal Complementary code | 50 pcs. / pack | ||
⇛S-7071EWC | Side | Through hole pin | Binary coded hexadecimal Complementary code | 50 pcs. / tray | ||
⇛S-7071EC | Side | Through hole pin | Binary coded hexadecimal Complementary code | 50 pcs. / pack |
- The products indicated by ⇛ mark are manufactured upon receipt of order basis.
- Taping and tray version can be supplied only in reel or tray unit.
Code Format
![](/file/img/code_s7000.png)
Recommended P.C.B. Pad Outline Dimensions
![](/file/img/recomme1_s7000.png)
![](/file/img/recomme2_s7000.png)
Size of P.C.B. Processing
![](/file/img/pcb_s7000.png)
Environmental Data
- ●The above contents and descriptions are subject to change without notice.