NIDEC COMPONENTS logo
NIDEC COMPONENTS logo

LIST

×

×


Products

Distributor

SG-English

×

Pushbutton switch DP4

●To buy this product, please go to the following Online Web stores.
To the Pushbutton switch“DP4&DPL4 series” page on the Chip1stop online shop

Non-Illuminated Type

 
FeaturesFeatures
  • Flexible Circuit Configuration The switch incorporates two 2-circuit switches which provide flexible circuit configuration.

  • High Contact Reliability Gold-plated contact with self-cleaning, twin contact mechanism provides high contact reliability.

  • PC Board Mount Direct mounting to PC board. The terminal pin layout is in inch pitch.

  • Ideal For Use in Dry Circuit (Gold-Plated Contact) When a switch is used under bad environmental conditions (sulfidizing gas, etc.), contact surface may be affected. Gold-plated contact is recommended especially for low current applications.

Specification

Rating Non-Switching:DC50V 100mA
Switching:100mA 5VDC(Gold DC0.2mV 1μA min.)
Initial Contact Resistance

100mΩ max. (1.5mA 200μVAC)

Dielectric Strength

250VAC 1 minute

Insulation Resistance

1,000MΩ min. (DC250V)

Electrical Life 200,000 operations
Travel

2.5mm

Operating Force

2.45±0.98N

Operating Temperature Range -25~+75℃
Storage Temperature Range -25~+85℃
Contact Bounce 5 ms max.

Part Number Designation

DP4 -200B- Z

Series

Structure

Registration No.

Contact plating

Blank: 

Silver plated

B: 

Gold plated

 

List of Part Numbers

 

 

 
 
Part No.Contact platingSW functionNo. of polesSW functionCAD
Part No.:DP4-200-Z Silver plated Momentary 2 poles ON-(ON)
Part No.:DP4-200B-Z Gold plated Momentary 2 poles ON-(ON)
★: Made to order products
Optional Accessories
AccessoriesPart No.ColorOuline dimensions
Color button 140008050103 White
140008050105 Red
Bracket 140000340157 Black
140000340162 Gray

Soldering

  • Manual soldering
    Device: Soldering iron   
    380°C, Max. 3 s Max.
  • Auto soldering
    Device: Jet wave or dip type   
    275±10℃ 6 s Max. ・Preheat time shall be 120 s max. at 80~120 ℃.
    ・ For DPL type, soldering should be done with the lock released.

PC Hole Layouts

Circuit Diagram

※Do not remove the button when the switch is locked.

Environmental Data

●The above contents and descriptions are subject to change without notice. 

Products

×

page top